# Diagnostics not working properly in multi-model mode?

**URL:** <https://forum.numer.ai/t/diagnostics-not-working-properly-in-multi-model-mode/1000>\
**Category:** Tournament\
**Created:** [September 28, 2020, 12:57pm UTC](https://forum.numer.ai/t/diagnostics-not-working-properly-in-multi-model-mode/1000 "2020-09-28T12:57:07Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![dominikschmidt](https://avatars.discourse-cdn.com/v4/letter/d/8491ac/32.png) [@dominikschmidt](https://forum.numer.ai/u/dominikschmidt)\
**Post date:** [September 28, 2020, 12:57pm UTC](https://forum.numer.ai/t/diagnostics-not-working-properly-in-multi-model-mode/1000/1 "2020-09-28T12:57:07Z")

</div>

Hi,  
I submitted two models today, both of them via manual upload of the .csv file. On this page [https://numer.ai/tournament](https://numer.ai/tournament) in the top left I can switch between my different models and view rank/reputation for each model and round/submission information for each model. The diagnostics panel however doesn’t change when switching between models. Is there any way to also look at this diagnostic information for other models than the primary one?

---

<div class="post-metadata">

**Author:** ![wigglemuse](https://yyz1.discourse-cdn.com/flex009/user_avatar/forum.numer.ai/wigglemuse/32/3094_2.png) [@wigglemuse](https://forum.numer.ai/u/wigglemuse)\
**Post date:** [September 28, 2020, 2:06pm UTC](https://forum.numer.ai/t/diagnostics-not-working-properly-in-multi-model-mode/1000/2 "2020-09-28T14:06:01Z")

</div>

The diagnostics should change also. Are you sure you didn’t upload the same csv for multiple models and therefore the stats are the same?

---

<div class="post-metadata">

**Author:** ![dominikschmidt](https://avatars.discourse-cdn.com/v4/letter/d/8491ac/32.png) [@dominikschmidt](https://forum.numer.ai/u/dominikschmidt)\
**Post date:** [September 28, 2020, 2:14pm UTC](https://forum.numer.ai/t/diagnostics-not-working-properly-in-multi-model-mode/1000/3 "2020-09-28T14:14:04Z")

</div>

I reuploaded it and now it’s fixed, so that’s probably what it was. Sorry for the unnecessary thread… 😌
